Chapter 1. The Apache HBase Shell

Table of Contents

1.1. Scripting with Ruby
1.2. Running the Shell in Non-Interactive Mode
1.3. HBase Shell in OS Scripts
1.3.1. Checking for Success or Failure In Scripts
1.4. Read HBase Shell Commands from a Command File
1.5. Passing VM Options to the Shell
1.6. Shell Tricks
1.6.1. Table variables
1.6.2. irbrc
1.6.3. LOG data to timestamp
1.6.4. Debug
1.6.5. Commands

The Apache HBase Shell is (J)Ruby's IRB with some HBase particular commands added. Anything you can do in IRB, you should be able to do in the HBase Shell.

To run the HBase shell, do as follows:

$ ./bin/hbase shell

Type help and then <RETURN> to see a listing of shell commands and options. Browse at least the paragraphs at the end of the help emission for the gist of how variables and command arguments are entered into the HBase shell; in particular note how table names, rows, and columns, etc., must be quoted.

See ??? for example basic shell operation.

Here is a nicely formatted listing of all shell commands by Rajeshbabu Chintaguntla.

1.1. Scripting with Ruby

For examples scripting Apache HBase, look in the HBase bin directory. Look at the files that end in *.rb. To run one of these files, do as follows:

$ ./bin/hbase org.jruby.Main PATH_TO_SCRIPT

1.2. Running the Shell in Non-Interactive Mode

A new non-interactive mode has been added to the HBase Shell (HBASE-11658). Non-interactive mode captures the exit status (success or failure) of HBase Shell commands and passes that status back to the command interpreter. If you use the normal interactive mode, the HBase Shell will only ever return its own exit status, which will nearly always be 0 for success.

To invoke non-interactive mode, pass the -n or --non-interactive option to HBase Shell.

1.3. HBase Shell in OS Scripts

You can use the HBase shell from within operating system script interpreters like the Bash shell which is the default command interpreter for most Linux and UNIX distributions. The following guidelines use Bash syntax, but could be adjusted to work with C-style shells such as csh or tcsh, and could probably be modified to work with the Microsoft Windows script interpreter as well. Submissions are welcome.

Note

Spawning HBase Shell commands in this way is slow, so keep that in mind when you are deciding when combining HBase operations with the operating system command line is appropriate.

Example 1.1. Passing Commands to the HBase Shell

You can pass commands to the HBase Shell in non-interactive mode (see ???) using the echo command and the | (pipe) operator. Be sure to escape characters in the HBase commands which would otherwise be interpreted by the shell. Some debug-level output has been truncated from the example below.

$ echo "describe 'test1'" | ./hbase shell -n
                
Version 0.98.3-hadoop2, rd5e65a9144e315bb0a964e7730871af32f5018d5, Sat May 31 19:56:09 PDT 2014

describe 'test1'

DESCRIPTION                                          ENABLED
 'test1', {NAME => 'cf', DATA_BLOCK_ENCODING => 'NON true
 E', BLOOMFILTER => 'ROW', REPLICATION_SCOPE => '0',
  VERSIONS => '1', COMPRESSION => 'NONE', MIN_VERSIO
 NS => '0', TTL => 'FOREVER', KEEP_DELETED_CELLS =>
 'false', BLOCKSIZE => '65536', IN_MEMORY => 'false'
 , BLOCKCACHE => 'true'}
1 row(s) in 3.2410 seconds    
                            
            

To suppress all output, echo it to /dev/null:

$ echo "describe 'test'" | ./hbase shell -n > /dev/null 2>&1

Example 1.2. Checking the Result of a Scripted Command

Since scripts are not designed to be run interactively, you need a way to check whether your command failed or succeeded. The HBase shell uses the standard convention of returning a value of 0 for successful commands, and some non-zero value for failed commands. Bash stores a command's return value in a special environment variable called $?. Because that variable is overwritten each time the shell runs any command, you should store the result in a different, script-defined variable.

This is a naive script that shows one way to store the return value and make a decision based upon it.

#!/bin/bash

echo "describe 'test'" | ./hbase shell -n > /dev/null 2>&1
status=$?
echo "The status was " $status  
if ($status == 0); then
    echo "The command succeeded"
else
    echo "The command may have failed."
fi
return $status
            

1.3.1. Checking for Success or Failure In Scripts

Getting an exit code of 0 means that the command you scripted definitely succeeded. However, getting a non-zero exit code does not necessarily mean the command failed. The command could have succeeded, but the client lost connectivity, or some other event obscured its success. This is because RPC commands are stateless. The only way to be sure of the status of an operation is to check. For instance, if your script creates a table, but returns a non-zero exit value, you should check whether the table was actually created before trying again to create it.

1.4. Read HBase Shell Commands from a Command File

You can enter HBase Shell commands into a text file, one command per line, and pass that file to the HBase Shell.

Example 1.3. Example Command File

create 'test', 'cf'
list 'test'
put 'test', 'row1', 'cf:a', 'value1'
put 'test', 'row2', 'cf:b', 'value2'
put 'test', 'row3', 'cf:c', 'value3'
put 'test', 'row4', 'cf:d', 'value4'
scan 'test'
get 'test', 'row1'
disable 'test'
enable 'test'
            

Example 1.4. Directing HBase Shell to Execute the Commands

Pass the path to the command file as the only argument to the hbase shell command. Each command is executed and its output is shown. If you do not include the exit command in your script, you are returned to the HBase shell prompt. There is no way to programmatically check each individual command for success or failure. Also, though you see the output for each command, the commands themselves are not echoed to the screen so it can be difficult to line up the command with its output.

$ ./hbase shell ./sample_commands.txt
0 row(s) in 3.4170 seconds

TABLE
test
1 row(s) in 0.0590 seconds

0 row(s) in 0.1540 seconds

0 row(s) in 0.0080 seconds

0 row(s) in 0.0060 seconds

0 row(s) in 0.0060 seconds

ROW                   COLUMN+CELL
 row1                 column=cf:a, timestamp=1407130286968, value=value1
 row2                 column=cf:b, timestamp=1407130286997, value=value2
 row3                 column=cf:c, timestamp=1407130287007, value=value3
 row4                 column=cf:d, timestamp=1407130287015, value=value4
4 row(s) in 0.0420 seconds

COLUMN                CELL
 cf:a                 timestamp=1407130286968, value=value1
1 row(s) in 0.0110 seconds

0 row(s) in 1.5630 seconds

0 row(s) in 0.4360 seconds                
            

1.5. Passing VM Options to the Shell

You can pass VM options to the HBase Shell using the HBASE_SHELL_OPTS environment variable. You can set this in your environment, for instance by editing ~/.bashrc, or set it as part of the command to launch HBase Shell. The following example sets several garbage-collection-related variables, just for the lifetime of the VM running the HBase Shell. The command should be run all on a single line, but is broken by the \ character, for readability.

$ HBASE_SHELL_OPTS="-verbose:gc -XX:+PrintGCApplicationStoppedTime -XX:+PrintGCDateStamps \ 
  -XX:+PrintGCDetails -Xloggc:$HBASE_HOME/logs/gc-hbase.log" ./bin/hbase shell            
        

1.6. Shell Tricks

1.6.1. Table variables

HBase 0.95 adds shell commands that provide a jruby-style object-oriented references for tables. Previously all of the shell commands that act upon a table have a procedural style that always took the name of the table as an argument. HBase 0.95 introduces the ability to assign a table to a jruby variable. The table reference can be used to perform data read write operations such as puts, scans, and gets well as admin functionality such as disabling, dropping, describing tables.

For example, previously you would always specify a table name:

hbase(main):000:0> create ‘t’, ‘f’
0 row(s) in 1.0970 seconds
hbase(main):001:0> put 't', 'rold', 'f', 'v'
0 row(s) in 0.0080 seconds

hbase(main):002:0> scan 't' 
ROW                                COLUMN+CELL                                                                                      
 rold                              column=f:, timestamp=1378473207660, value=v                                                      
1 row(s) in 0.0130 seconds

hbase(main):003:0> describe 't'
DESCRIPTION                                                                           ENABLED                                       
 't', {NAME => 'f', DATA_BLOCK_ENCODING => 'NONE', BLOOMFILTER => 'ROW', REPLICATION_ true                                          
 SCOPE => '0', VERSIONS => '1', COMPRESSION => 'NONE', MIN_VERSIONS => '0', TTL => '2                                               
 147483647', KEEP_DELETED_CELLS => 'false', BLOCKSIZE => '65536', IN_MEMORY => 'false                                               
 ', BLOCKCACHE => 'true'}                                                                                 
1 row(s) in 1.4430 seconds

hbase(main):004:0> disable 't'
0 row(s) in 14.8700 seconds

hbase(main):005:0> drop 't'
0 row(s) in 23.1670 seconds

hbase(main):006:0> 
	  

Now you can assign the table to a variable and use the results in jruby shell code.

hbase(main):007 > t = create 't', 'f'
0 row(s) in 1.0970 seconds

=> Hbase::Table - t
hbase(main):008 > t.put 'r', 'f', 'v'
0 row(s) in 0.0640 seconds
hbase(main):009 > t.scan
ROW                           COLUMN+CELL                                                                        
 r                            column=f:, timestamp=1331865816290, value=v                                        
1 row(s) in 0.0110 seconds
hbase(main):010:0> t.describe
DESCRIPTION                                                                           ENABLED                                       
 't', {NAME => 'f', DATA_BLOCK_ENCODING => 'NONE', BLOOMFILTER => 'ROW', REPLICATION_ true                                          
 SCOPE => '0', VERSIONS => '1', COMPRESSION => 'NONE', MIN_VERSIONS => '0', TTL => '2                                               
 147483647', KEEP_DELETED_CELLS => 'false', BLOCKSIZE => '65536', IN_MEMORY => 'false                                               
 ', BLOCKCACHE => 'true'}                                                                                 
1 row(s) in 0.0210 seconds
hbase(main):038:0> t.disable
0 row(s) in 6.2350 seconds
hbase(main):039:0> t.drop
0 row(s) in 0.2340 seconds
	  

If the table has already been created, you can assign a Table to a variable by using the get_table method:

hbase(main):011 > create 't','f'
0 row(s) in 1.2500 seconds

=> Hbase::Table - t
hbase(main):012:0> tab = get_table 't'
0 row(s) in 0.0010 seconds

=> Hbase::Table - t
hbase(main):013:0> tab.put ‘r1’ ,’f’, ‘v’ 
0 row(s) in 0.0100 seconds
hbase(main):014:0> tab.scan
ROW                                COLUMN+CELL                                                                                      
 r1                                column=f:, timestamp=1378473876949, value=v                                                      
1 row(s) in 0.0240 seconds
hbase(main):015:0> 
	  

The list functionality has also been extended so that it returns a list of table names as strings. You can then use jruby to script table operations based on these names. The list_snapshots command also acts similarly.

hbase(main):016 > tables = list(‘t.*’)
TABLE                                                                                                                               
t                                                                                                                                   
1 row(s) in 0.1040 seconds

=> #<#<Class:0x7677ce29>:0x21d377a4>
hbase(main):017:0> tables.map { |t| disable t ; drop  t}
0 row(s) in 2.2510 seconds

=> [nil]
hbase(main):018:0> 
            

1.6.2. irbrc

Create an .irbrc file for yourself in your home directory. Add customizations. A useful one is command history so commands are save across Shell invocations:

$ more .irbrc
require 'irb/ext/save-history'
IRB.conf[:SAVE_HISTORY] = 100
IRB.conf[:HISTORY_FILE] = "#{ENV['HOME']}/.irb-save-history"

See the ruby documentation of .irbrc to learn about other possible configurations.

1.6.3. LOG data to timestamp

To convert the date '08/08/16 20:56:29' from an hbase log into a timestamp, do:

hbase(main):021:0> import java.text.SimpleDateFormat
hbase(main):022:0> import java.text.ParsePosition
hbase(main):023:0> SimpleDateFormat.new("yy/MM/dd HH:mm:ss").parse("08/08/16 20:56:29", ParsePosition.new(0)).getTime() => 1218920189000

To go the other direction:

hbase(main):021:0> import java.util.Date
hbase(main):022:0> Date.new(1218920189000).toString() => "Sat Aug 16 20:56:29 UTC 2008"

To output in a format that is exactly like that of the HBase log format will take a little messing with SimpleDateFormat.

1.6.4. Debug

1.6.4.1. Shell debug switch

You can set a debug switch in the shell to see more output -- e.g. more of the stack trace on exception -- when you run a command:

hbase> debug <RETURN>

1.6.4.2. DEBUG log level

To enable DEBUG level logging in the shell, launch it with the -d option.

$ ./bin/hbase shell -d

1.6.5. Commands

1.6.5.1. count

Count command returns the number of rows in a table. It's quite fast when configured with the right CACHE

hbase> count '<tablename>', CACHE => 1000

The above count fetches 1000 rows at a time. Set CACHE lower if your rows are big. Default is to fetch one row at a time.

comments powered by Disqus